Materials

Common Surface Defects on Semiconductor Wafers and Their Root Causes

In modern semiconductor manufacturing, wafer surface quality is one of the most critical factors determining device performance, yield, and long-term reliability.

Why Wafer Testing Matters and the Essential Tests You Can't Skip

In advanced semiconductor manufacturing, wafer testing is a critical process step bridging front-end wafer fabrication and back-end assembly and packaging.

Chiplet and Advanced Packaging Testing: Solving Thermal and Signal Integrity Challenges in 3D Stacking

SiC and GaN Third-Generation Semiconductors: Why Dynamic Parameter Testing (DPT) is Key to Quality

From Lab to Mass Production: How Third-Party Testing Laboratories Accelerate Semiconductor Time-to-Market

3 Critical AI Chip Testing Challenges in 2026: Ensuring Edge Computing Reliability

As Generative AI shifts rapidly from the cloud to the edge (Edge AI), the demand for high-performance chips in autonomous vehicles, industrial robotics, and smart medical devices has skyrocketed.

Advanced Deformulation Strategies for Linear Low-Density Polyethylene: A Multidimensional Analytical Approach

Linear low-density polyethylene (LLDPE) is a widely used polyolefin material characterized by its unique balance of flexibility, toughness, and processability.

How to Perform Ultrasound Testing on Low-Alloyed Sheet Steel: A Step-by-Step Guide

Ultrasonic Testing (UT) employs high-frequency sound waves within the 0.1 to 15 MHz spectrum to examine materials for internal defects and thickness measurement by evaluating wave propagation through the sample.

The Ultimate Guide to Metallurgical Testing: Everything You Need to Know

Metallurgical testing represents a scientific method for examining both physical characteristics and chemical components of metallic substances.

Failure Mode and Effects Analysis (FMEA) in Metallurgy: Analyzing Material Failures

Failure Mode and Effects Analysis (FMEA) represents an engineering approach which systematically identifies evaluates and ranks possible failure modes and their effects on products or processes...

Deformulation Services: Your Key to Product Innovation

Deformulation services are a procedure of testing the formula of a known product to figure out how its constituents relate to each other…

How to Identify the Quality of Ceramic Products such as Sanitary Ware?

This article is published by VITOLI on May 16, 2019. Read the original article here.Sanitary ware is mainly composed of sanitary ceramics and its accessories. Sanitary ceramics include various toilets, facial cleansers, bidets, etc., and judging the q…

Tags: Sanitary Ceramics, Quality, Identify, Judge

How to Determine the Quality of Ceramic Floor Tiles

This article is published by SFGATE. Read the original article here.Ceramic tiles are rated via the American Society for Testing and Materials for their abilities to withstand normal use circumstances. These factors determine the safety of the tile an…

Tags: Determine, Quality, Ceramic Floor Tiles, Grade

Characterization Analysis of Polymers

As an important type of material, polymers play key roles in our daily life. Polymers are made up of small molecular units, and these small molecular units are called monomers. Monomers of polymer can be joined together either naturally or synthetical…